Home | Community | Message Board


RVF Garden Supply
Please support our sponsors.

Cannabis, Marijuana, Ganja & Greens >> Hashish, Oils & Tinctures

Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Amazon Shop for: Rolling Papers

Jump to first unread post. Pages: 1
Offlinenick-onelove
Astronaut of Inner-Brainspace
Male User Gallery


Registered: 10/25/09
Posts: 142
Loc: Mendocino County, CA
Last seen: 6 years, 5 months
Gonna Make Some Honey Bud + Laced Joints
    #381252 - 03/10/10 02:17 PM (6 years, 8 months ago)

I'm gonna get a make a batch of honey oil with my Honey Bee Extractor and I was going to try to make some honey bud and laced joints while I'm at it. I've never never done this before and instructions on the internet are vague at best.

I just throw in the buds and joints before I spray the butane through then just let it evap for a few weeks? Any advice/tips would be appreciated.


--------------------
"When I was in England, I experimented with marijuana a time or two, and I didn't like it. I didn't inhale and never tried it again."
                                                        - Bill Clinton

"When I was a kid I inhaled frequently. That was the point."
                                                        - Barack Obama

That's Change I Can Believe In!


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineDungenessDank
Lord of the Flies


Registered: 05/06/08
Posts: 9,372
Loc: PNW
Last seen: 3 years, 6 months
Re: Gonna Make Some Honey Bud + Laced Joints [Re: nick-onelove]
    #381322 - 03/10/10 05:03 PM (6 years, 8 months ago)

Just make the hash oil, then use a paper clip to drop it onto a rolling paper, then add the weed, lick and stick. Its a lot easier that way then trying to encase a joint in oil like han solo in carbonite.


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinenick-onelove
Astronaut of Inner-Brainspace
Male User Gallery


Registered: 10/25/09
Posts: 142
Loc: Mendocino County, CA
Last seen: 6 years, 5 months
Re: Gonna Make Some Honey Bud + Laced Joints [Re: DungenessDank]
    #381445 - 03/10/10 08:22 PM (6 years, 8 months ago)

I hear people talking a lot about lacing their joints with oil after or during the rolling. I don't understand how that's possible because the oil is thicker than shit.

I did pretty much exactly what I said above and everything looks good so far. I'll re-post here with how they smoke in a few days to weeks once all the butane has evaporated.


--------------------
"When I was in England, I experimented with marijuana a time or two, and I didn't like it. I didn't inhale and never tried it again."
                                                        - Bill Clinton

"When I was a kid I inhaled frequently. That was the point."
                                                        - Barack Obama

That's Change I Can Believe In!


Post Extras: Print Post  Remind Me! Notify Moderator
Invisiblecoda


Registered: 04/20/08
Posts: 4,734
Trusted Cultivator
Re: Gonna Make Some Honey Bud + Laced Joints [Re: nick-onelove]
    #382052 - 03/11/10 06:47 PM (6 years, 8 months ago)

butane won't take a few days or weeks to evaporate.  It boils at room temp.


--------------------


MFDoom666: sobriety kills my buzz every time.


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinenick-onelove
Astronaut of Inner-Brainspace
Male User Gallery


Registered: 10/25/09
Posts: 142
Loc: Mendocino County, CA
Last seen: 6 years, 5 months
Re: Gonna Make Some Honey Bud + Laced Joints [Re: coda]
    #382085 - 03/11/10 07:55 PM (6 years, 8 months ago)

Yeah I'd just rather be safe than sorry. I actually smoked one of the joints today and it was fuckin' bubonic. Better than a kief joint or a chunk of hash in a bong bowl. Definitely something I'll be doing more of in the future once this batch runs out. I haven't tried the bud yet, but I have high hopes. The honey bud didn't come out quite as dark as what you would buy in a dispensary though, I don't know why.


--------------------
"When I was in England, I experimented with marijuana a time or two, and I didn't like it. I didn't inhale and never tried it again."
                                                        - Bill Clinton

"When I was a kid I inhaled frequently. That was the point."
                                                        - Barack Obama

That's Change I Can Believe In!


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleHarry_Ba11sachM
cannoisseur
 User Gallery


Registered: 04/20/08
Posts: 11,753
Loc: Nepal Flag
Trusted Cultivator
Re: Gonna Make Some Honey Bud + Laced Joints [Re: nick-onelove]
    #382127 - 03/11/10 09:01 PM (6 years, 8 months ago)

I usually just put a layer of the honey oil on the paper right where you would normally lick. that way it sticks your paper shut and you get a nice even line all the way down the joint. Of course, this requires a little assistance from a friend since you need both hands to hold the joint tight while they apply the oil


--------------------


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinenick-onelove
Astronaut of Inner-Brainspace
Male User Gallery


Registered: 10/25/09
Posts: 142
Loc: Mendocino County, CA
Last seen: 6 years, 5 months
Re: Gonna Make Some Honey Bud + Laced Joints [Re: Harry_Ba11sach]
    #382130 - 03/11/10 09:05 PM (6 years, 8 months ago)

I never understood that, I could have 6 friends helping me and that hash oil is so fuckin' sticky I would still tear the paper, let alone roll one lol.


--------------------
"When I was in England, I experimented with marijuana a time or two, and I didn't like it. I didn't inhale and never tried it again."
                                                        - Bill Clinton

"When I was a kid I inhaled frequently. That was the point."
                                                        - Barack Obama

That's Change I Can Believe In!


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleHarry_Ba11sachM
cannoisseur
 User Gallery


Registered: 04/20/08
Posts: 11,753
Loc: Nepal Flag
Trusted Cultivator
Re: Gonna Make Some Honey Bud + Laced Joints [Re: nick-onelove]
    #382148 - 03/11/10 09:15 PM (6 years, 8 months ago)

maybe just put tiny blobs instead of smearing it?


--------------------


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinenick-onelove
Astronaut of Inner-Brainspace
Male User Gallery


Registered: 10/25/09
Posts: 142
Loc: Mendocino County, CA
Last seen: 6 years, 5 months
Re: Gonna Make Some Honey Bud + Laced Joints [Re: Harry_Ba11sach]
    #382161 - 03/11/10 09:21 PM (6 years, 8 months ago)

I'm sure I could figure it out eventually, but it doesn't get much easier than tossing a bunch of joints and buds in the Pyrex dish you're about to make the oil in. :smile: Plus then they're soaked completely through.


--------------------
"When I was in England, I experimented with marijuana a time or two, and I didn't like it. I didn't inhale and never tried it again."
                                                        - Bill Clinton

"When I was a kid I inhaled frequently. That was the point."
                                                        - Barack Obama

That's Change I Can Believe In!


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleHarry_Ba11sachM
cannoisseur
 User Gallery


Registered: 04/20/08
Posts: 11,753
Loc: Nepal Flag
Trusted Cultivator
Re: Gonna Make Some Honey Bud + Laced Joints [Re: nick-onelove]
    #382165 - 03/11/10 09:24 PM (6 years, 8 months ago)

true! That's actually a really good idea! Even the paper is coated with oil that way


--------------------


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineDungenessDank
Lord of the Flies


Registered: 05/06/08
Posts: 9,372
Loc: PNW
Last seen: 3 years, 6 months
Re: Gonna Make Some Honey Bud + Laced Joints [Re: nick-onelove]
    #382320 - 03/12/10 01:23 AM (6 years, 8 months ago)

Take a piece of metal and scoop a glob of hash oil on the end of it, then take a lighter to the metal near but not on the oil, and the oil should just drip off the metal as the heat is conducted.


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinenick-onelove
Astronaut of Inner-Brainspace
Male User Gallery


Registered: 10/25/09
Posts: 142
Loc: Mendocino County, CA
Last seen: 6 years, 5 months
Re: Gonna Make Some Honey Bud + Laced Joints [Re: DungenessDank]
    #382357 - 03/12/10 02:50 AM (6 years, 8 months ago)

Sounds like a good way to manage oil on its own in general, Dank. But when it comes to joints I'll stick with absolutely soaking them like I did. (He says baked out of his mind on one of the aforementioned joints.)


--------------------
"When I was in England, I experimented with marijuana a time or two, and I didn't like it. I didn't inhale and never tried it again."
                                                        - Bill Clinton

"When I was a kid I inhaled frequently. That was the point."
                                                        - Barack Obama

That's Change I Can Believe In!


Post Extras: Print Post  Remind Me! Notify Moderator
Invisiblecoda


Registered: 04/20/08
Posts: 4,734
Trusted Cultivator
Re: Gonna Make Some Honey Bud + Laced Joints [Re: nick-onelove]
    #383462 - 03/14/10 01:47 PM (6 years, 8 months ago)

Yah, i never had much luck using oil in joints.  Would always come out too globby and the paper never burned right (boat all the way).  Now blunts on the other hand are peeeerfect for an oil lace.  We'd take the blunt, coat the middle with a nice layer of oil and spread it around, then the bud sticks the oil (which makes the blunt a tiny bit easier to roll), and since the paper is much thicker then joints it burns more evenly and doesn't tear during the oil application.

Been a while since I've done that, fucking tasty though.


--------------------


MFDoom666: sobriety kills my buzz every time.


Post Extras: Print Post  Remind Me! Notify Moderator
Jump to top. Pages: 1

Amazon Shop for: Rolling Papers

Cannabis, Marijuana, Ganja & Greens >> Hashish, Oils & Tinctures

Similar ThreadsPosterViewsRepliesLast post
* whats the best way to lay hash oil to buds yoohoo 751 0 02/24/10 10:10 PM
by yoohoo
* BHO from fresh buds and trim? Kush 4,655 1 07/28/09 02:12 AM
by Johnny420
* How do you smoke butane honey oil? pazzi 20,388 8 10/29/09 02:10 AM
by nachohippie
* getting kief from dried leaves in a grinder? zenthor 4,260 1 04/04/09 12:10 AM
by travelleler
* "Cannagliss" pot drops! Dr. SiekadellykM 15,248 12 11/20/09 12:05 PM
by Inverted
* Access to some of the worlds best marijuana Steve Buscemi 1,543 7 03/28/10 04:58 PM
by Steve Buscemi
* Lets make Hexane Hash!! **COMPLETED**
( 1 2 3 4 5 all )
coda 67,815 96 11/05/13 09:41 PM
by pablokabute
* Couple questions on oil Chronica 3,462 15 07/21/11 10:47 AM
by HGH

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Magash
4,196 topic views. 0 members, 36 guests and 5 web crawlers are browsing this forum.
[ Toggle Favorite | Print Topic | Stats ]
Search this thread:
Everything Mushrooms
Please support our sponsors.

Copyright 1997-2016 Mind Media. Some rights reserved.

Generated in 0.047 seconds spending 0.003 seconds on 14 queries.