Home | Community | Message Board


Seedsman.com
Please support our sponsors.

Cannabis, Marijuana, Ganja & Greens >> Hashish, Oils & Tinctures

Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Jump to first unread post. Pages: 1
Offlinemandini
Registered: 01/10/09
Posts: 7
Last seen: 5 years, 10 months
extraction question
    #185660 - 01/20/09 11:08 PM (7 years, 10 months ago)

ok so my buddie has like 3lbs of shwag and hes wanting to make oil out of it, ive heard of peopel doing it but never done it so i couldnt give him to much info on the topic, so i thought id ask on here, what is the best way to get the best oil, ive heard of soaking it in rubbing alcohol and heating it, is that a good way or is there a better way that dont cost a shit load of money


Post Extras: Print Post  Remind Me! Notify Moderator
Offlineimpgl

Registered: 04/20/08
Posts: 1,666
Last seen: 3 years, 8 months
Re: extraction question [Re: mandini]
    #185714 - 01/21/09 12:14 AM (7 years, 10 months ago)

just finished with this tek and was very happy with the results. acetone can be a bit pricey though.


--------------------


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinemandini
Registered: 01/10/09
Posts: 7
Last seen: 5 years, 10 months
Re: extraction question [Re: impgl]
    #185727 - 01/21/09 12:19 AM (7 years, 10 months ago)

what tek?


Post Extras: Print Post  Remind Me! Notify Moderator
Offlineimpgl

Registered: 04/20/08
Posts: 1,666
Last seen: 3 years, 8 months
Re: extraction question [Re: mandini]
    #185743 - 01/21/09 12:27 AM (7 years, 10 months ago)



--------------------


Post Extras: Print Post  Remind Me! Notify Moderator
Invisiblecoda


Registered: 04/20/08
Posts: 4,734
Trusted Cultivator
Re: extraction question [Re: impgl]
    #189958 - 01/27/09 12:50 PM (7 years, 10 months ago)

ISO hash sucks, use a better solvent.  Acetone would be the easiest to get and is more economically feasible then hexane or butane if you're wanting to use 3 lbs of material.

Remember you should separate all the seeds and stems out of your schwag if you want the best quality hash you can get out of it.


--------------------


MFDoom666: sobriety kills my buzz every time.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineSpaceMonkey
Mind Pilot
Male

Registered: 02/09/09
Posts: 3,469
Loc: Hawaiian Islands Flag
Last seen: 10 months, 7 days
Trusted Cultivator
Re: extraction question [Re: coda]
    #193525 - 02/09/09 03:25 AM (7 years, 9 months ago)

pvc pipe 2 and 1/2 in or so in diameter, about 1  and a half ft long to 2 ft. 2 caps for the ends.

drill 1 hole in 1 end cap just big enough to get the butane to expell from the can. now drill a hole the same size about an inch away. this is to allow the pressure to not build up and let the gas drain through the weed.

now in the other end cap drill a whole bunch of small 1/16 holes. these are going to allow your gas and oils to drain.Also cut a few metal screen to put on the inside just to help keep the weed particles from getting into your oil.

Fill this tube now with your crushed up herbs about an inch from being full. tighten your caps and start pumping the butane in :stoned:


--------------------

:guns: Don't Mistake My Kindness For Weakness :guns:


Post Extras: Print Post  Remind Me! Notify Moderator
Invisiblecoda


Registered: 04/20/08
Posts: 4,734
Trusted Cultivator
Re: extraction question [Re: SpaceMonkey]
    #196198 - 02/15/09 12:39 PM (7 years, 9 months ago)

and do this outside, also you're going to need a pyrex dish to capture the butane/oil as it comes out of the tube.


--------------------


MFDoom666: sobriety kills my buzz every time.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineSpaceMonkey
Mind Pilot
Male


Registered: 02/09/09
Posts: 3,469
Loc: Hawaiian Islands Flag
Last seen: 10 months, 7 days
Trusted Cultivator
Re: extraction question [Re: coda]
    #196216 - 02/15/09 01:49 PM (7 years, 9 months ago)

for sure, do this outside! Do not smoke around it until your sure all the gas has boiled off. And definatley you will need something glass to collect in. I have used anything from a glass plate to glass drinking cups, to big pyrex bowls. Just depends on how much your wanting to process.

Here is a post i just made yesterday, showing the cups i am using for collection and what you end up with after the extraction
:grin:

http://www.growery.org/forums/showflat.php/Cat/0/Number/24257/page/0/fpart/3/vc/1


--------------------

:guns: Don't Mistake My Kindness For Weakness :guns:


Post Extras: Print Post  Remind Me! Notify Moderator
Jump to top. Pages: 1

Cannabis, Marijuana, Ganja & Greens >> Hashish, Oils & Tinctures

Similar ThreadsPosterViewsRepliesLast post
* Easy Butane Extraction Dr. Penguin 24,479 10 08/04/09 02:15 AM
by Ero42oH2o
* Extracting THC with liquid O2 2Cents 10,632 7 02/15/09 04:51 PM
by agmotes165
* mouldy cannabis question Psathyrellaceae 1,949 7 02/04/09 10:23 PM
by captain.koons
* Couple questions on oil Chronica 3,456 15 07/21/11 10:47 AM
by HGH
* Cold oil extraction. The_Centre 2,374 4 03/06/09 07:26 PM
by SevenFingers
* Can i make honey oil from resin?
( 1 2 all )
The squatch 12,284 26 05/06/09 10:53 AM
by Hydro
* Lets make Hexane Hash!! **COMPLETED**
( 1 2 3 4 5 all )
coda 67,559 96 11/05/13 09:41 PM
by pablokabute
* Post your HASH
( 1 2 3 4 5 6 7 all )
araucaria 35,405 133 04/04/10 08:35 AM
by juke adro

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Magash
1,778 topic views. 0 members, 197 guests and 10 web crawlers are browsing this forum.
[ Toggle Favorite | Print Topic | Stats ]
Search this thread:
Avalon Magic Plants
Please support our sponsors.

Copyright 1997-2016 Mind Media. Some rights reserved.

Generated in 0.033 seconds spending 0.005 seconds on 14 queries.