Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
ok so I built a huge grow tent in my room. I run aeroponics and I have almost my entire setup complete minus grow lights and venting. can I get by the first flowering cycle with just 2 400watt hps and then after first flower go up to 600watts on each. im only doing 10 plants at a time in this tent. they are all in individual buckets with individual spray systems.my tent size is 7'6 tall 5'3 deep 10'3 wide. it comes out to 414 cubic ft on the inside of the tent. I was going to use a 220cfm booster fan in between both lights pushing to a y joint and into the 6" fan and filter combo which is 440cfm. so total that 660cfm of venting. will that be enough to vent the odors. im also buying a de humidifier to keep the humidity and temps down. ill pst up some pics. right now im just using the tent for veg but I will be vegging in another area. they are not all in the individual systems yet except for 3.the picture with the plants in it. you can see pvc in the corners that is how much further the then goes up
You will be fine with 2 400w for the first run. Rather than jump to 600w, if your going big I would run 2 1k watt lights. Your harvests will be much larger with 2 1k lights instead of the 600w. I have always flowered with 1k lights and love harvest time due to dense and fat nugz.
Threaded
Previous
Index
Next
Some of these posts are very old and might contain outdated information. You may wish to 
Edit 
Reply 
