Home | Community | Message Board


World Seed Supply
Please support our sponsors.


Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Kraken Kratom Red Vein Kratom   PhytoExtractum Maeng Da Thai Kratom Leaf Powder   Original Sensible Seeds Bulk Cannabis Seeds   North Spore North Spore Mushroom Grow Kits & Cultivation Supplies

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Offlinerichismalls
Stranger

Registered: 05/24/12
Posts: 81
Last seen: 7 years, 5 months
Electric question
    #727293 - 04/23/14 03:09 PM (9 years, 11 months ago)

So I have a really old house that I rent. The circuit breaker is small many things run off of one circuit in the house, including where i was going to plug my light into. Now the dryer is gas and plugs into a standard socket, but next to it the large 30 amp 135/250v plug is being unused and its connected to a 30 amp breaker, a nice undisturbed power source for my grow. my question is how can i convert that to a smaller voltage, or is it suitable to plug in my light? i have a grow blu 180x3 LED and im not trying to push my luck. Does anyone know of a converter to downstep the voltage? im assuming my LED doesnt draw 240 v

Extras: Filter Print Post Top
InvisibleHawksresurrection
 User Gallery


Registered: 12/04/08
Posts: 13,464
Trusted Cultivator
Re: Electric question [Re: richismalls]
    #727300 - 04/23/14 03:59 PM (9 years, 11 months ago)

It sure doesn't  Are there no open slots to just install a new CB and run a dedicated line for your grow?


--------------------
Dude she isn't as young as she use to be.

-niteowl

Extras: Filter Print Post Top
Offlinerichismalls
Stranger

Registered: 05/24/12
Posts: 81
Last seen: 7 years, 5 months
Re: Electric question [Re: Hawksresurrection]
    #727336 - 04/23/14 08:37 PM (9 years, 11 months ago)

the house is quite old (late 50's) and the electric is a touchy subject. there are no more punches available in the Circuit breaker. basically the half of the house the grow would be on is all running off of a 20 20 breaker. so much that the breaker pops whenever i run about 12-1500 more watts that my normal house usage of electricity. its an issue. BUT as said, there is a three prong outlet (2 straight bars, 1 L shaped) that has a 30 30 breaker on it, and nothing else. i did see construction grade splitters that may be an option if i can find the proper male end. also i could replace the socket if i was really inclined, but id like to just buy an adapter if possible. im not sure what my question is, but more or less wondering if anyone has had experience with this.

Extras: Filter Print Post Top
InvisibleHawksresurrection
 User Gallery


Registered: 12/04/08
Posts: 13,464
Trusted Cultivator
Re: Electric question [Re: richismalls]
    #727337 - 04/23/14 08:56 PM (9 years, 11 months ago)

You could just get a normal magnetic ballast and run it on 220.  HID lights are a better way to go anyhow.


Otherwise I don't know how to get around it


--------------------
Dude she isn't as young as she use to be.

-niteowl

Extras: Filter Print Post Top
OfflineDoc
stoner
 User Gallery


Registered: 03/27/11
Posts: 186
Loc: New Caledonia
Last seen: 9 years, 5 months
Re: Electric question [Re: Hawksresurrection]
    #728183 - 04/28/14 02:49 PM (9 years, 10 months ago)

I'd agree. Get a 600w or 1000w HPS ballast and light or MH/HPS switchable ballast. Make sure you can run it off of 240v or 220v current. This will actually cut your electricity bill in half for the light. So if you're running a 1000w light on the 240v circuit it will draw the same energy as a 500w light plugged into a 120v circuit!

I would highly recommend taking advantage of your situation and using this 240v outlet to run all your lights and switch to HID lighting.


--------------------
No one is free when others are oppressed

Extras: Filter Print Post Top
OfflineDoc
stoner
 User Gallery


Registered: 03/27/11
Posts: 186
Loc: New Caledonia
Last seen: 9 years, 5 months
Re: Electric question [Re: Doc]
    #728184 - 04/28/14 02:52 PM (9 years, 10 months ago)

There is no way to use this plug with anything rated for 120v unless you use a transformer to step down the voltage. So you will not be able to buy any adapters, and if you do use an adapter you'll actually be wasting more electricity.


--------------------
No one is free when others are oppressed

Extras: Filter Print Post Top
InvisiblephychotronM
Medicated


Registered: 02/17/11
Posts: 1,995
Loc: Earth (mostly) Flag
Trusted Cultivator
Re: Electric question [Re: richismalls]
    #729844 - 05/06/14 08:18 AM (9 years, 10 months ago)

The great thing about most LEDs is that they run on 240v, plugs right in. Read the sticker on your Grow Blu and you'll see the input voltage is 100-240v. The internal PSU's down step the voltage. When someone tells you HID is better make sure to ask how much actual LED experience they have. :wink:


I've got the GrowBlu 240x3 in the back where its more blueish.


--------------------
Any help given is for educational purposes only. Its your responsibility not to break any applicable laws
Bamboo Bongs I make | Perfect Dry and Cure | Grapegod under LED
“Human beings, vegetables, or cosmic dust, we all dance to a mysterious tune intoned in the distance by an invisible player.” ~ Albert Einstein

Edited by phychotron (05/06/14 08:20 AM)

Extras: Filter Print Post Top
Offlinerichismalls
Stranger

Registered: 05/24/12
Posts: 81
Last seen: 7 years, 5 months
Re: Electric question [Re: phychotron]
    #730273 - 05/07/14 09:02 PM (9 years, 10 months ago)

wow how foolish of me not to even look at the light. i did go to the website and took a look, just never paid too much attention to the light itself. i plugged it in..it worked..then back in the box it went. there is an electrician coming by friday for other electrical problems and im going to ask if he can split that line while hes here. if not i need to find a 30 new 30 amp outlet, its really hard to find an adapter to a 3 prong dryer outlet without paying a shit load of money

would this work?

http://www.cesco.com/b2c/product/36804?gdftrk=gdfV25445_a_7c1847_a_7c7081_a_7c36804&gclid=CNfuroqrm74CFckWMgodmWcA_g

Extras: Filter Print Post Top
InvisiblephychotronM
Medicated


Registered: 02/17/11
Posts: 1,995
Loc: Earth (mostly) Flag
Trusted Cultivator
Re: Electric question [Re: richismalls]
    #730439 - 05/08/14 11:57 AM (9 years, 10 months ago)

I dunno I've never actually plugged one into 240 outlet before, just knew it was possible. You'd probably want to talk to the electrician about that sort of thing.


--------------------
Any help given is for educational purposes only. Its your responsibility not to break any applicable laws
Bamboo Bongs I make | Perfect Dry and Cure | Grapegod under LED
“Human beings, vegetables, or cosmic dust, we all dance to a mysterious tune intoned in the distance by an invisible player.” ~ Albert Einstein

Extras: Filter Print Post Top
OfflineDoc
stoner
 User Gallery


Registered: 03/27/11
Posts: 186
Loc: New Caledonia
Last seen: 9 years, 5 months
Re: Electric question [Re: phychotron]
    #730545 - 05/08/14 08:19 PM (9 years, 10 months ago)

I have a 240v to 120v socket adaptor, dunno where i got it but i figure it was no more than $10...but I had no idea leds could use 240v...thats awesome!


--------------------
No one is free when others are oppressed

Extras: Filter Print Post Top
Offlinerichismalls
Stranger

Registered: 05/24/12
Posts: 81
Last seen: 7 years, 5 months
Re: Electric question [Re: richismalls]
    #730559 - 05/08/14 09:06 PM (9 years, 10 months ago)

everyone kept mother-fucking me for buying a $700 LED and im glad i did now.

Extras: Filter Print Post Top
InvisiblephychotronM
Medicated


Registered: 02/17/11
Posts: 1,995
Loc: Earth (mostly) Flag
Trusted Cultivator
Re: Electric question [Re: richismalls]
    #730600 - 05/09/14 12:45 AM (9 years, 10 months ago)

You could very easily waste $700 on the wrong LED, but the GrowBlu is a solid light.


--------------------
Any help given is for educational purposes only. Its your responsibility not to break any applicable laws
Bamboo Bongs I make | Perfect Dry and Cure | Grapegod under LED
“Human beings, vegetables, or cosmic dust, we all dance to a mysterious tune intoned in the distance by an invisible player.” ~ Albert Einstein

Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: Kraken Kratom Red Vein Kratom   PhytoExtractum Maeng Da Thai Kratom Leaf Powder   Original Sensible Seeds Bulk Cannabis Seeds   North Spore North Spore Mushroom Grow Kits & Cultivation Supplies


Similar ThreadsPosterViewsRepliesLast post
* CFL Electrical Question: "4-way" Splitter?
( 1 2 all )
TrueHerbCrystal 20,241 31 01/26/10 01:50 AM
by the man
* Fundamental questions to setup grow op. bam 6,536 19 08/17/11 10:45 AM
by bam
* Electricity question Dimo114 1,006 5 09/22/11 07:45 PM
by night train
* Misconception of 120v/240v *DELETED* curbstop 3,084 11 08/09/10 12:43 PM
by Stoneth
* question on ballast and setting up 400 watt HPS - technical questions Pilze 1,509 2 12/14/09 01:15 PM
by Pilze
* so you are worried about the electric bill and getting caught
( 1 2 all )
Kilroy 16,782 33 12/10/10 12:41 AM
by Poisoncrazy
* Question about wiring. wire5 1,772 4 10/13/11 11:55 PM
by wire5
* first post, first grow, building a discreet cabinet & lighting questions. (help me shop?) 40oz 2,577 3 06/09/11 05:40 AM
by gris47

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: FurrowedBrow, Magash, Data, Dr. Siekadellyk, phychotron
1,747 topic views. 0 members, 262 guests and 260 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:
High Mountain Gold Compost
Please support our sponsors.

Copyright 1997-2024 Mind Media. Some rights reserved.

Generated in 0.026 seconds spending 0.008 seconds on 14 queries.