Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
I built this room with pilfered and recycled parts, mostly. I think, the most I spent on this project was 100$ or so. It's located in a basement with VERY HIGH humidity, due to the Earth Foundation that it was built on in the late 1800's. Mold and humidity suck BALLS in WNY. I built these chambers to mimic a drier environment, and still filter the air intake unto the chamber.
Dimensions:
Main (Flower)Room: 5.5'W x5.5'L x7'H
Mother/Clone-Light Sealed Chamber:
34"W x 24"L x36"H
This Inner chamber held the mother SK#1, which ended up not being a mother plant, but in fact...a male. This chamber also held a 6-Clone, Top Feed Hydro for cloning. The hydro is built around a 10gl rubbermaid tote, adjustable flow indoor deco water pump+hoses/links, an air stone+pump/hoses, aquarium water heater.