|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 Dexter_Morgan
Registered: 04/22/08
Posts: 30
Last seen: 15 years, 22 days
|
 The Official DIY Thread 
#10021 - 04/23/08 01:13 AM (15 years, 11 months ago) |
|
|
I'll start
This is a 9qt oil pan ($6.17)
Here is my small recirculating top feed tables. I use two of these to suport my flowering chamber, they can hold (6) 6" square pots, or (2) 8.5" (2.5Gal) square pots.
This is a small aquarium water pump (listed @ 153gph, but not even close, $20). Attached is standard 1/2" tubing, and i created a distribution manifold, with (1) tee and (4) elbows. I tap off of the manifold with 1/4" elbows and 1/4" tubing. The length of 3/4 pvc is only there, to give the tubing some rigidity.
Here it is standing, after i moved some plants around. The extra hole in the corner is basically just an extra port. I keep a spare pump, so i can easily change the solution, without moving the containers.
|
 andyistic
We got them veenoms!
Registered: 04/20/08
Posts: 10,990
Loc: On the Lot
|
Re: The Official DIY Thread [Re: Dexter_Morgan]
#10035 - 04/23/08 01:16 AM (15 years, 11 months ago) |
|
|
Looking good. 
--------------------
Bastard greedy for salvia, want me to cheat, take advantage of a friend shroomerite G!
Tangerines said: "Real men quit cold turkey - alone in their rooms with no drugs."
OK so ... where is everyone? This place is so dead lately!
|
Dunno
Village Idiot
Registered: 04/20/08
Posts: 2,132
Last seen: 15 years, 7 months
|
Re: The Official DIY Thread [Re: Dexter_Morgan]
#10036 - 04/23/08 01:17 AM (15 years, 11 months ago) |
|
|
--------------------
Learning to love life by living through loss and mistakes
Lessons learned then gradually surfacing
Letting go, stripping naked to scream
I am not perfect, nor do I strive to be
I am alive in this world of face-first falls and public breakdowns
I'm a retarded, disfigured clown
Dying to be heard for the simple art of letting this heavy wall finally fall
I'm an equal being of no race or color
A hallucination if you will
Sneaking into the lives of strangers and letting them fall apart
To a new rhythm, just to feel better
|
Acidistic
Registered: 04/20/08
Posts: 19
Last seen: 15 years, 11 months
|
Re: The Official DIY Thread [Re: Dexter_Morgan]
#10179 - 04/23/08 06:18 AM (15 years, 11 months ago) |
|
|
Yes! I was hoping somebody would start a DIY thread.
--------------------
"Hubbs (to Joe): Ever since you got hit by that laser at that Blue Öyster Cult show you've been acting like a pussy!"
|
Dunno
Village Idiot
Registered: 04/20/08
Posts: 2,132
Last seen: 15 years, 7 months
|
Re: The Official DIY Thread [Re: Acidistic]
#10315 - 04/23/08 10:47 AM (15 years, 11 months ago) |
|
|
why didnt you DIY, acidistic
--------------------
Learning to love life by living through loss and mistakes
Lessons learned then gradually surfacing
Letting go, stripping naked to scream
I am not perfect, nor do I strive to be
I am alive in this world of face-first falls and public breakdowns
I'm a retarded, disfigured clown
Dying to be heard for the simple art of letting this heavy wall finally fall
I'm an equal being of no race or color
A hallucination if you will
Sneaking into the lives of strangers and letting them fall apart
To a new rhythm, just to feel better
|
Jrsxt
Registered: 04/20/08
Posts: 134
Last seen: 7 years, 8 months
|
Re: The Official DIY Thread [Re: Dunno]
#10326 - 04/23/08 11:06 AM (15 years, 11 months ago) |
|
|
Hell yeah. That looks nice.
|
Dunno
Village Idiot
Registered: 04/20/08
Posts: 2,132
Last seen: 15 years, 7 months
|
Re: The Official DIY Thread [Re: Jrsxt]
#10327 - 04/23/08 11:07 AM (15 years, 11 months ago) |
|
|
thanks
--------------------
Learning to love life by living through loss and mistakes
Lessons learned then gradually surfacing
Letting go, stripping naked to scream
I am not perfect, nor do I strive to be
I am alive in this world of face-first falls and public breakdowns
I'm a retarded, disfigured clown
Dying to be heard for the simple art of letting this heavy wall finally fall
I'm an equal being of no race or color
A hallucination if you will
Sneaking into the lives of strangers and letting them fall apart
To a new rhythm, just to feel better
|
smily
Spam With Substance
Registered: 04/20/08
Posts: 206
Loc: here and there
Last seen: 3 years, 10 months
|
Re: The Official DIY Thread [Re: Dunno]
#10336 - 04/23/08 11:24 AM (15 years, 11 months ago) |
|
|
very interesting concept cant wait to see it run
|
Dunno
Village Idiot
Registered: 04/20/08
Posts: 2,132
Last seen: 15 years, 7 months
|
Re: The Official DIY Thread [Re: smily]
#10339 - 04/23/08 11:25 AM (15 years, 11 months ago) |
|
|
you all do realize i didnt start this thread right?
--------------------
Learning to love life by living through loss and mistakes
Lessons learned then gradually surfacing
Letting go, stripping naked to scream
I am not perfect, nor do I strive to be
I am alive in this world of face-first falls and public breakdowns
I'm a retarded, disfigured clown
Dying to be heard for the simple art of letting this heavy wall finally fall
I'm an equal being of no race or color
A hallucination if you will
Sneaking into the lives of strangers and letting them fall apart
To a new rhythm, just to feel better
|
Toiletduk
Head Goon
Registered: 04/20/08
Posts: 1,675
Loc: Earthfarm 1
|
Re: The Official DIY Thread [Re: Dexter_Morgan]
#10621 - 04/23/08 03:00 PM (15 years, 11 months ago) |
|
|
Awesome. You should write up a tech with all the details and post it in cultivation.
--------------------
|
Dexter_Morgan
Registered: 04/22/08
Posts: 30
Last seen: 15 years, 22 days
|
Re: The Official DIY Thread [Re: Toiletduk]
#10714 - 04/23/08 04:24 PM (15 years, 11 months ago) |
|
|
i though i just did
|
geokills
······· º¿° ·······
 
Registered: 05/08/01
Posts: 1,287
Loc: city of angels
Last seen: 7 months, 13 days
|
Re: The Official DIY Thread (moved) [Re: Dexter_Morgan]
#12666 - 04/25/08 02:49 PM (15 years, 11 months ago) |
|
|
 This thread was moved from The Smoke Lounge.
Reason:
By user's request.
|
Dexter_Morgan
Registered: 04/22/08
Posts: 30
Last seen: 15 years, 22 days
|
Re: The Official DIY Thread (moved) [Re: geokills]
#12833 - 04/25/08 06:29 PM (15 years, 11 months ago) |
|
|
thanks, this is a better place for the thread.
'Grow' fans are unbelievably overpriced(along with everything else 'grow' related). Rather than spend $100+ dollars on a 256cfm Dayton Blower, you can go to walmart and buy a Stanley Blower Fan ($40), which moves the exact same amount of air.
Here is a picture, i have also attached a 6" register duct ($6 Home Depot), The Register end of the duct was cut with snips to fit snugly over the output side of the fan.
Here i've also attached a 90 degree elbow to the input.
a couple more angles
DIY FTW
|
andyistic
We got them veenoms!
Registered: 04/20/08
Posts: 10,990
Loc: On the Lot
|
Re: The Official DIY Thread (moved) [Re: Dexter_Morgan]
#12837 - 04/25/08 06:41 PM (15 years, 11 months ago) |
|
|
You certainly know your stuff.
I'm impressed.
|
Toiletduk
Head Goon
Registered: 04/20/08
Posts: 1,675
Loc: Earthfarm 1
|
Re: The Official DIY Thread (moved) [Re: geokills]
#12977 - 04/25/08 09:06 PM (15 years, 11 months ago) |
|
|
Quote:
geokills said:
<img src='http://www.growery.org/forums/images/moved.gif'> This thread was moved from The Smoke Lounge.
Reason:
By user's request.
Yes, much better here.
Awesome tech, Dexter! 
--------------------
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal 
|
Re: The Official DIY Thread (moved) [Re: Toiletduk]
#13214 - 04/26/08 12:09 AM (15 years, 11 months ago) |
|
|
Not quite as cool as teh fan trick, but here's my grow box. Used to be a 4-drawer filing cabinet.
built the whole thing for $200
--------------------
|
Hanky
Fat Ladies Bingo
Registered: 04/21/08
Posts: 2,397
Loc: Ass Flavour Pie Factory
Last seen: 14 years, 10 months
|
Re: The Official DIY Thread (moved) [Re: Harry_Ba11sach]
#13220 - 04/26/08 12:12 AM (15 years, 11 months ago) |
|
|
What kind of light do you have in that?
--------------------
Coaster Said: "wut do u post bout flumbooyon"
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: The Official DIY Thread (moved) [Re: Hanky]
#13249 - 04/26/08 12:38 AM (15 years, 11 months ago) |
|
|
250W HPS, a little over 100 cfm from the fan, and I traded out that DWC for some good 'ol organic soil.
--------------------
|
Hanky
Fat Ladies Bingo
Registered: 04/21/08
Posts: 2,397
Loc: Ass Flavour Pie Factory
Last seen: 14 years, 10 months
|
Re: The Official DIY Thread (moved) [Re: Harry_Ba11sach]
#13254 - 04/26/08 12:40 AM (15 years, 11 months ago) |
|
|
Nice set up. Have you got any pics of it producing?
--------------------
Coaster Said: "wut do u post bout flumbooyon"
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: The Official DIY Thread (moved) [Re: Hanky]
#13303 - 04/26/08 01:15 AM (15 years, 11 months ago) |
|
|
I've got one or two pics from when my plant was tiny and a little shocked from transport (I got my clones in a plastic bag when it was snowing  ). They're about 1.5 weeks into flower right now, I'll take a pic for you tomorrow when the lights come back on.
--------------------
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
