Home | Community | Message Board


Cannabis Seeds UK
Please support our sponsors.


Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Offlineomentheduck
Male


Registered: 06/01/08
Posts: 18
Last seen: 14 years, 11 months
3rd Class Aero cloner
    #193249 - 02/08/09 12:22 AM (15 years, 1 month ago)

Well I just made this I wanted to share it, I hope that it proves useful to someone other than me, I
I know that it was cheap done but thats kinda the Idea, please feel free to modify, but if it works better you should let me know lol.

Ok to start.

[gradient:#14E029,#] Step One [/gradient] Get Materials:
1. Air Pump
2. Aquarium Air Stone
3. Container the size you want the cloner. ( needs to be able to hold water...)
4. Styro-foam ( a sheet or some to  make slats)
5. Thick black plastic
6. Clear Plastic for top cover
7. Double side sticky tape or other adhesive.
8. Something to cut with, I used a razor and scissors.

Pump, stone , tape, bin, styro-foam sheet, can be  obtained at walmart for about 25 bucks.

[gradient:#14E029,#]Step Two[/gradient]
Get the Styro-foam and your container that you wish to use




Measure the styro-foam up with your container, and either make a sheet that will fit snug a bout 1/2 inch down from the lip.
[gradient:#D9181B,#]Make sure of this before you cut them all if doing slats!!!!!![/gradient]


Mine are slats

[gradient:#14E029,#]Step Three[/gradient]
Put hole thru the styro-foam, in some i put more than other





Do this how you see fit styro-foam it soft just remember that to many holes damages the structural integrity of it.

Now put tape one the best side of the styro-foam medium, It might be to tor up to adhere, and remember to make sure the surface is clean or else it will not stick well!




You can see in this one the extra hole i was talking about.




[gradient:#14E029,#]Step Four[/gradient]
Get the thick black plastic and align your slats on them or your styro-foam sheet, adhere, I flipped mine over and rubbed the back to help by smoothing it out and warming it up.



Trim around the edges , leave about a half inch of the black plastic all the way around the styro-foam, the pic is of the untrimmed one.
, Poke hole thru the plastic according to the hole in you foam.



you can kinda see what I used I lead pencil.

[gradient:#14E029,#]Step Five[/gradient]

Now make sure that it fits snuggly and does not fall down any futher!!



If it meets our 3rd rate standard add your Water,air pump and air stone,

You will probably have to weight down the end of the air stone.
Now how i did this was My tube H had chosen already had a "t" connector attached to it so I ran my line thru it. but you could probably run it  thru a notch made in the side of a piece of the styro-foam!



[gradient:#14E029,#]Step Six[/gradient]
Add Pump and stone
Here are mine.

1200ccpm




They say soak the stone for an hour or so before use!!!!



I used a piece of sailing rig to weigh it down



Make sure that the water is high enough to bubble but low enough not to touch the bottom of the clone's stem base bubbles can hit them!

There should be about 1 inch gap between water and  stem.

Put it all together, fashion clear plastic to the top for a humidity dome, I am using clear plastic bag but bout to change it to a clear sterlite  shoe box.

Heres mine finished,





and if you are wondering what you can do with some of the chunks of styro-foam I used them as a wedge to help lock in the clones, I made the hole so I could pull roots back thru them.

Hope this helps some one!


--------------------
"I look, therefore I see. I try, therefore I will. I embrace, therefore I'm embraced. I believe, therefore I am!" omentheduck

Edited by omentheduck (02/08/09 12:35 AM)

Extras: Filter Print Post Top
Offlineomentheduck
Male


Registered: 06/01/08
Posts: 18
Last seen: 14 years, 11 months
Re: 3rd Class Aero cloner [Re: omentheduck]
    #193476 - 02/08/09 11:18 PM (15 years, 1 month ago)

Well she proved that she'll put root on umm lol
These were about 7 day old clone take out of soil and put in the cloner!





--------------------
"I look, therefore I see. I try, therefore I will. I embrace, therefore I'm embraced. I believe, therefore I am!" omentheduck

Extras: Filter Print Post Top
Offlinecheapskate
Registered: 02/06/09
Posts: 7
Last seen: 14 years, 11 months
Re: 3rd Class Aero cloner [Re: omentheduck]
    #194758 - 02/11/09 02:39 PM (15 years, 1 month ago)

well done, bubble cloners are cheap and effective for sure.

Extras: Filter Print Post Top
Jump to top Pages: 1


Similar ThreadsPosterViewsRepliesLast post
* Multi Flow Hydroponics legallyhomeless 17,339 16 08/29/08 11:47 PM
by jeetered
* Simple DIY Aeroponic Perpetual Harvest system <all credit to stinkbud> tonysoprano6379 37,773 17 11/04/10 05:40 PM
by Ursmare
* Noob questions about start/finish with Aeroponics Lurksponge 3,588 3 04/18/09 06:27 PM
by travelleler
* Coco Growers Thread.
( 1 2 3 4 5 6 all )
Hanky 37,208 109 09/13/08 02:08 PM
by Sirius
* any ebb flow table growers here?
( 1 2 all )
captain.koons 18,654 25 09/16/08 10:21 PM
by captain.koons
* How long can I keep them in small nets? smilebit 2,724 2 09/15/08 12:51 AM
by Magash
* Building a custom res... Kine 2,951 10 12/16/08 08:12 PM
by Kine
* Hydroponic Systems appleorange 5,961 12 08/17/08 10:07 PM
by dude7932288

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: FurrowedBrow, Magash, Data, Dr. Siekadellyk, phychotron
2,180 topic views. 0 members, 193 guests and 124 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:
Avalon Magic Plants
Please support our sponsors.

Copyright 1997-2024 Mind Media. Some rights reserved.

Generated in 0.021 seconds spending 0.005 seconds on 12 queries.